Philips HTR9900/12 User Manual page 12

VIDEO-AUDIO IN 1,
l
VIDEO-AUDIO OUT 1
• Connect VIDEO-AUDIO IN 1 to the
analogue audio/video output port of a
recording device such as a video
cassette recorder, DVD recorder or to
an outboard audio/video processor.
• Connect VIDEO-AUDIO OUT 1 to
the recording device's corresponding
analogue audio/video input port.
• The signal present at VIDEO-AUDIO
OUT 1 port is dependent upon the
current active SOURCE. There will be
no output when VIDEO 1/AUDIO 1 is
the selected source input. This prevents
feedback through the recording device
thereby preventing possible damage
to your speakers.
VIDEO-AUDIO 2-3-4
m
• These
comprise the High Defi nition A/V
Receiver other principal inputs.
Connect these S-Video, composite
video, and analogue stereo audio input
ports to the corresponding output
ports of source devices.
AUDIO 5-6 IN, AUDIO 5 OUT
n
• Input for additional line level input
signals such as CD player, MP player or
a tape recorder. Connect AUDIO 5
OUT to the analogue audio input of a
recording device such as a docking
system, DVD recorder or to an
outboard audio/video processor.
• Connect the AUDIO 5 IN socket to
the device's corresponding output.
AUDIO 6 IN is advisable to connect to
a dedicated analogue output of
line-level audio sources like a CD player
or Stereo tuner.
EN
12
RS-232C
o
• The RS-232C is meant for product
service purposes.
SPEAKER CONNECTORS
p
• Connect the respective speaker's
FRONT L, FRONT R, CENTER,
SURROUND R, SURROUND L,
SURROUND BACK L and
SURROUND BACK R channels to their
corresponding loudspeakers. Make sure
the "+" (red) terminal and "-" (black)
terminal are connected to the
corresponding "+" and "-" terminals of
the loudspeaker. Use extra care to
ensure that no stray wires or strands
cross between posts or terminals at
either end. The High Defi nition A/V
Receiver is designed to produce
optimum sound quality when
connected to speakers with impedances
within its operating range. Please make
sure that all the speakers are rated 8
ohms minimum per speaker.
SWITCHED AC OUTLET
q
• This convenience outlet can supply
switched power to another device or
accessory. It is powered ON and OFF
by the front panel 2 button or the
RECEIVER 2 button on the remote
control. The total draw of all devices
connected to this outlet must not
exceed 100 watts.