Start disc playback
Press OPEN/CLOSE ç to open the disc tray.
Place a disc with the disc label facing up.
Press OPEN/CLOSE ç to close the disc tray.
Playback starts automatically.
If the disc menu appears on the TV, use
keys or the numeric keypad to
select an option in the menu and press OK
to start playback.
To enjoy the powerful surround sound from
the speakers, press SURROUND on the
remote control to turn on the multi-channel
to stop playback.
Note When you press u button, playback
resumes from where it last stopped. To start
playback from the beginning, you have to
For more troubleshooting tips, see the user manual.
Press DISC/USB on the remote control.
Check the connection to the TV and ensure the plugs are fi rmly in place.
Check the speaker connections and settings.
Check the audio connections and press SOURCE to select the correct input source.
Press SURROUND to turn on the multi-channel surround output.
If the indicator on the wireless transmitter blinks continuously for more than one minute.
Press and hold CONNECT button on the wireless transmitter for 5 seconds. Turn on the wireless receiver.
See the user manual that came with your Philips DVD Home Theatre System.
Go to www.philips.com/welcome
Playback other supported
Insert your USB device to the USB socket.
Press DISC/USB to switch to 'USB' mode.
Press u to start playback.
To stop playback, press DISC/USB to switch to
'DISC' mode. You can unplug your USB device now.
Other portable audio player
Use the supplied MP3 LINE-IN cable to connect the
headphone output socket on your portable audio
player to MP3 LINE-IN socket.
Press PLAY on your portable audio player.
Press MP3 LINE-IN to listen to the playback.
2007 C Koninklijke Philips N.V.
All rights reserved.
DVD HOME THEATRE SYSTEM
Quick Start Guide
What's in the box?
Screws and Allen
key (for connecting
the tall speakers)
1 centre, 2 front, 2 rear speakers
MP3 LINE-IN cable
and 2 batteries