Using In Pc Monitor Mode; Features Menu - Philips 30PF9946/12 User Manual

Features menu

Timer
This menu lets you use the TV set as an alarm.
& Press the
MENU
é
With the cursor, select
"
: to select an automatic standby period.
Sleep
'
: enter the current time.
Time
Note: the time is updated automatically each time
the TV set is switched on via the teletext
information on programme 1. If the programme
does not have teletext, the update will not take
place.
(
: enter the start time.
Start Time

Using in PC monitor mode

Your TV can be used as a computer monitor.
You must first of all connect the computer and adjust the resolution (see p. 6).
Choosing PC mode
Press the key on the remote control to switch the TV to PC mode. Press the
PC
TV mode. If there is no PC signal for more than five seconds, the TV automatically goes into standby
mode.
Using the PC menus
TV Menu
Picture
Sound
Features
Install
π
Mode
PC mode
Picture π
Audio selection
Features
Reset to Factory
Mode
Features
Phase
Clock
Format
Auto adjust
8
key.
Features , then
TV
PC
Brightness
Contrast
Horizontal Pos
Vertical Pos
Colour Temp
§
Stop Time
è
Program No
programme for the wake-up alarm.
!
Activate
Timer .
•
Once
•
Daily
•
Off
ç Press the B key on the remote control to put
the TV set in standby. It will automatically come
on at the time programmed. If you leave the TV
set on, it will just change programmes at the
time entered (and will go to standby mode at
the Stop Time).
Press the key to access the specific settings of the
MENU
PC monitor mode. Use the cursor keys to adjust them (the
settings are automatically saved).
Picture
•
Brightness/Contrast
contrast.
•
Horizontal/Vertical Position
and vertical placing of the image.
•
Colour Temperature
normal or warm).
Audio selection
To choose the sound reproduced on the TV
( or ).
PC TV
Features
• : eliminates the horizontal (
Phase/Clock
vertical (
Clock
• : to choose between large screen (
Format
or the original (
• : position is set automatically.
Auto adjust
Reset to Factory
To return to the factory settings
Mode
To come back to TV mode.
: enter the standby time.
.: enter the number of the
: the settings include:
for a single alarm;
for each day,
to cancel.
: to adjust the brightness and
: to adjust the horizontal
: to adjust the colours (cool,
) interfering lines.
) format of the PC screens.
Native
key to return to
TV
) and
Phase
)
Full screen