Connecting To A Satellite System - Toshiba RD-XS52SU Owner's Manual

Connections

Connecting to a satellite system

Choose one of the following according to your type of satellite receiver.
HDMI OUTPUT
VIDEO S-VIDEO
INPUT1
INPUT3
CHANNEL
CHANGE
VIDEO
S-VIDEO
IR
VHF / UHF
Satellite antenna
DIGITAL AUDIO
Y P P
B R
OUTPUT
BITSTREAM/PCM
COMPONENT OUTPUT
OPTICAL
R L VIDEO S-VIDEO
24
RF IN
(FROM ANT.)
RF OUT
(TO TV)
Satellite receiver
3CH
4CH
IN
OUT
Satellite antenna
Satellite
receiver
Audio outputs
Video output
HDMI OUTPUT
R L VIDEO S-VIDEO
INPUT1
OUTPUT INPUT3
R L VIDEO S-VIDEO
When the satellite receiver does not have audio/
video outputs
1 Connect a satellite antenna to the satellite receiver.
2 Connect the RF IN (FROM ANT.) terminal on the
recorder and the RF OUT terminal of the satellite
receiver.
3 Connect the RF OUT (TO TV) terminal on the recorder
and the antenna input connector of the TV.
You will need to:
• set "Cable Box/DBS" of "Set Top Box setting" to
"C.Box". page 42
• set "Select Input" of "Set Top Box setting"to "3CH" or
"4CH". page 42
You can control satellite channels from the recorder.
Perform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder.
2) Set "IR control" of "Set Top Box setting" to "On".
page 42
When the satellite system has audio/video outputs
1 Connect a satellite antenna to the satellite system.
2 Connect the INPUT1 or INPUT3 (VIDEO/L/R) jacks on
the recorder and the audio/video output jacks of the
satellite system.
3 Connect the OUTPUT (VIDEO/L/R) jacks on the
recorder and the audio/video input jacks of the TV.
4 Connect the RF OUT (TO TV) terminal on the recorder
and the antenna input connector of the TV.
You will need to:
• set "Cable Box/DBS" of "Set Top Box setting" to
"C.Box". page 42
• set "Select Input" of "Set Top Box setting" to "Line1".
C
C
IR
page 42
You can control satellite channels from the recorder.
Perform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder.
2) Set "IR control" of "Set Top Box setting" to "On".
page 42
page 25
page 25