Connecting Your Tv; Connecting A Vcr; Connecting A Cable Converter Box - Toshiba 27A50 Owner's Manual

Colorstream color television
Hide thumbs Also See for 27A50:
Table of Contents

Advertisement

Connecting Your TV

If you haven't connected electronic equipment before, or you have been frustrated in the past, you may wish to read this
section. (Cables are not supplied.)
A coaxial cable is the standard cable that comes in from your
G
antenna or cable converter box. Coaxial cables use "F"
connectors.
Audio and video cables are usually color coded according to
G
use: yellow for video and red and white for audio. The red
audio cable is for the stereo right channel, and the white audio
cable is for the stereo (or mono) left channel. If you look at
the rear panel of the TV, you will see that the terminals are
color coded in the same manner as the cables.
S-video cables provide better picture performance. S-video
G
cables can only be used with S-video compatible components.
ColorStream™ cables come in sets of three and provide the
G
best picture performance. ColorStream cables can only be
used with ColorStream compatible components.

Connecting a VCR

This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and to
record from one channel while watching another channel.
Cable lead-in or
antenna
Stereo VCR
S-VIDEO
VIDEO
OUT
L
R
IN
OUT
OR

Connecting a cable converter box

This connection allows you to watch cable and premium channels.
Tune the TV to channel 3 or 4 (whichever channel is vacant in your
broadcast area), then use the converter box to change channels.
From cable
IN
OUT
Cable converter
box
IN from ANT OUT to TV
CH3
CH4
TV
IN
OUT
COLOR
VIDEO
VIDEO
STREAM
VIDEO
INPUT
Y
L/
L/
L
MONO
MONO
S-VIDEO
AUDIO
AUDIO
C
AUDIO
B
R
R
R
C
R
VIDEO-1 VIDEO-2
TV
IN
OUT
ANT
COLOR
VIDEO
VIDEO
STREAM
VIDEO
INPUT
Y
L/
L/
L
MONO
MONO
S-VIDEO
AUDIO
AUDIO
C
AUDIO
B
R
R
R
C
R
VIDEO-1 VIDEO-2
Caution:
Do not plug the TV in until you have finished
connecting all of your equipment.
Caution:
If using a mono VCR, connect L/Mono to VCR
Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
Do not connect the video cable and the S-video
cable to VIDEO 1 simultaneously.
ANT
Note:
The VIDEO 2 jacks can also be used for
connecting a second piece of video equipment,
such as a video disc player or camcorder etc.
with audio/video outputs.
Note:
When you use a converter box with your TV,
there may be features that you cannnot program
using the Remote Control, such as blocking
channels, and programming your favorite
channels.
Antenna Coaxial Cable
AUDIO/VIDEO Cables
S-Video Cable
ColorStream Cable
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

32a4032a5036a5036a40Mw27fn127a40

Table of Contents