Download Print this page
Toro MULTIMATIX 720G Instruction Manual

Toro MULTIMATIX 720G Instruction Manual

Toro sprinkler user manual

Advertisement

Quick Links

720G A
The 720G part circle model is factory preset to 3 GPM, 180° arc and 25° trajectory. The full circle model is preset to 6 GPM, 360° arc and
25° trajectory. To adjust these settings, use the following procedures.
Adjust Flow
1
Flow is adjustable from 1 to 9 GPM
• Part Circle - Factory preset to 3 GPM
• Full Circle - Factory preset to 6 GPM
Tip Flow adjustment can be made
wet or dry.
3
Install Sprinkler and Check Arc Setting
I
DJUSTMENT
2
+
1
3
4
NSTRUCTIONS
Adjust Arc (part circle models only)
2
Arc is adjustable from 40° to 360°
• Factory preset to 180°
• Only right side of arc
is adjustable
Tip Arc can be adjusted wet
or dry. Turn nozzle to left stop
before changing arc.
increase
decrease
Tip Full turn changes arc 180°; half turn changes arc 90°.
Adjust Radius/Trajectory
4
Trajectory is adjustable from 7° to 25°
• Factory preset to 25°
3
11
To decrease (–)
To increase (+)
wise
Tip 7° setting is not recommended for
newly seeded areas.
1
clockwise
counterclockwise
clockwise
counterclock-
TM
2
+

Advertisement

loading

Summary of Contents for Toro MULTIMATIX 720G

  • Page 1 720G A DJUSTMENT The 720G part circle model is factory preset to 3 GPM, 180° arc and 25° trajectory. The full circle model is preset to 6 GPM, 360° arc and 25° trajectory. To adjust these settings, use the following procedures. Adjust Flow Flow is adjustable from 1 to 9 GPM •...
  • Page 2 720G S PECIFICATIONS AND Specifications *Note: Disassembly Remove Rubber Cover Remove Snap Ring Sprinkler Performance (@ 65 psi & 25° trajectory) Flow Adj. Pressure Radius Flow Precipitation Rate* feet Reassembly Install Sprinkler Assembly Alignment Keys ERVICE NSTRUCTIONS Install Snap Ring in/hr in/hr CAUTION: Snap ring must be properly...