Bagging The Clippings; Side-Discharging The Clippings; Installing The Grass Bag - Toro 20016 Operator's Manual

Figure 18

Bagging the Clippings

Use the grass bag when you want to collect grass and leaf
clippings from the lawn.
If the side discharge chute is on the mower, remove it and
lock the side discharge door (refer to Removing the Side
Discharge Chute) before bagging the clippings.
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.

Installing the Grass Bag

1. Raise and hold up the rear door (Figure 19).
Figure 19
2. Remove the rear discharge plug (Figure 20).
Figure 20
3. Install the bag onto the door rod (Figure 21).
Figure 21
4. Lower the rear door.
Removing the Grass Bag
To remove the bag, reverse the steps above.

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it and insert the rear
discharge plug (refer to Removing the Grass Bag) before
side-discharging the clippings.
Important: Ensure that the rear discharge plug is in
place before you side-discharge the clippings (Figure
22).
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
Figure 22
Installing the Side Discharge Chute
1. Unlock the side discharge door (Figure 23).
Figure 23
8