Archive Full; Communication Error - Texas Instruments TI-83 PLUS User Manual

Archive Full

This error appears when the TI-83 Plus does not have sufficient
memory for the application. In order to make room for another
application, you must delete an application and/or archived
variables from the TI-83 Plus. Before deleting an application
from the TI-83 Plus, you can back it up by using the
Link >
menu in TI-GRAPH LINK™ for the TI-83
Receive Flash Software...
Plus. Once saved, you can reload it to the TI-83 Plus later using
the menu in TI-GRAPH LINK .
Link > Send Flash Software

Communication Error

This error indicates the Flash Installer is unable to communicate
with the TI-83 Plus. The problem is usually associated with the
TI-GRAPH LINK cable and its connection to the TI-83 Plus and/or
to the computer. Make sure the cable is firmly pushed into the
calculator and the computer.
If this does not correct the problem, try a different
TI-GRAPH LINK cable and reboot your computer. If you continue
to get this error, please contact TI-CARES™.
Organizer for the TI-83 Plus Page 37