General Thomson Gateway Troubleshooting - THOMSON TG585 V8 Setup And User Manual

Wireless multi-user adsl2+ gateway
Hide thumbs Also See for TG585 V8:
Table of Contents

Advertisement

6.2

General Thomson Gateway Troubleshooting

None of the lights light up (Thomson Gateway does not work)
Make sure that:
The Thomson Gateway is plugged into a power socket outlet.
You are using the correct power supply for your Thomson Gateway device.
The power requirements for your Thomson Gateway are clearly indicated on the identification
label of the Thomson Gateway. Only use the power adaptor supplied with your Thomson
Gateway.
The Thomson Gateway is turned on via the push button or rocker switch on the back panel.
The Broadband LED does not light up
Make sure that:
The DSL cable is correctly connected. For more information, see
The DSL service is enabled on your telephone line. For more information, contact your Internet Service
Provider.
The Internet LED does not light up
Make sure that your user name and password are correct.
Proceed as follows:
1
Browse to the
Thomson Gateway
2
On the Broadband menu, click Internet Services.
3
Under Internet, click View More.
4
Check your user name
5
Re-enter your password.
6
Click Connect.
Thomson Gateway unreachable
If your Thomson Gateway cannot be reached, you might consider a hardware reset as described in
to Factory Defaults" on page
Poor Thomson Gateway performance
Make sure that the Thomson Gateway is installed and configured as instructed in
or as instructed by the Service Provider.
E-DOC-CTC-20090708-0001 v1.0
GUI.
50.
6
Troubleshooting
"1.2 Installing your Thomson
"1 Installation" on page 3
Gateway".
"6.5 Reset
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tg587n v2

Table of Contents