Tally Genicom MATRIX PRINTER 2150 User Manual [Page 81]: Printer Self-test (rolling Ascii)
Tally genicom printer - dotmatrix printer user manual.
Reference manual
Printer self-test
(Rolling ASCII)
Testmode
Initializing ...
3
1
2
4
ASCII80 ASCII136
Back
Next
1
2
3
4
PRINT
BACK
To check operational readiness, your printer contains a self-test routine
which allows testing of the printer configuration, the print quality and cor-
rect operation of your printer.
Before performing a self-test, your printer must be switched off. Ensure
that paper and a ribbon are inserted. Keep the key Online pressed
Online
while switching on the printer, until Testmode appears on the display.
Setup
The display offers you the selection between ASCII 80 (80 ASCII characters
are printed per line) and ASCII 136 (136 ASCII characters are printed per
Online
line).
Make sure that the selected format (ASCII 80 or ASCII 136)
Setup
STOP
matches your paper format; otherwise the printer may be
mechanically damaged.
Press the soft key for the ASCII 80 format (corresponds to Legal Portrait) or
for ASCII 136 (Double or Legal Landscape). The display will indicate
Test mode Off.
Test functions
?
QUIT
71
Comments to this Manuals
Latest comments: