Tally Genicom MATRIX PRINTER 2150 User Manual [Page 51]: Setting The Tear Position
Tally genicom printer - dotmatrix printer user manual.
Reference manual
Setting the tear position
Adjust
Paperway
Menu
Char
1
2
3
4
TOF
Head
Tear
1
2
3
4
TearAdj= 00/72"*
Set
<
>
Exit
1
2
3
4
PRINT
BACK
If the tear position of the paper is not aligned with the tear edge of the
printer, you can adjust it. Loaded paper may have to be torn and re-
positioned to the park position.
Press the Setup key. The printer changes to setup mode.
Press the Adjust key.
Online
Setup
Press the Tear key.
Online
Setup
Press the
firm the setting by pressing the Set key.Press the Setup key. The printer
Online
is reset to the initial status.
The correction – the range is from -99/72" to +99/72" – made
Setup
will be retained after switching off the printer.
Make sure that the set form length corresponds to the
actual length of the forms you are using.
<
>
or
key to move the perforation to the desired position. Con-
Settings (II)
?
QUIT
41
Comments to this Manuals
Latest comments: