Tally Genicom MATRIX PRINTER 2150 User Manual [Page 111]: Problems With The Print Quality
Tally genicom printer - dotmatrix printer user manual.
Reference manual
Problems with the
print quality
Print is too pale
Smudged print
PRINT
BACK
1. The ribbon is used up or the ribbon cassette is not correctly fitted. Refer to
the section
Changing the ribbon cassette
2. The printhead to platen gap is not correctly set, refer to the section
Setting the printhead gap .
For printers with the AGA = always or once: Enter a correction value <0
(correction value 0 to -10). See the section
1. The ribbon is damaged (e.g. frayed). Change the ribbon as described in
the section
Changing the ribbon cassette
2. The printhead gap is too small, increase the gap. See the section
the printhead gap
.
For printers with the AGA = always or once: Enter a correction value >0
(correction value 0 to +10). See the section
Troubleshooting
.
Setting the printhead gap
.
Setting
Setting the printhead gap
?
.
.
QUIT
101
Comments to this Manuals
Latest comments: