Pass Height
This function changes the height of block characters and barcodes within a
Graphics Pass.
Command ^Hxx
Arguments
^H
xx
Example: The Graphics Pass, ^M0402000GRA ^H02PHIC^- prints:
^M
04
02
00
0
GRA
^H
02
PHIC
Pass Height Command
New window height in increments of 0.1 inches
(0.25 cm) from 01 to 99. The actual height ranges
from 0.1 to 9.9 inches (0.3 to 25.2 cm).
Horizontal orientation of characters.
Window height of 0.4 inches (1.02 cm).
Window width of 0.2 inches (0.51 cm).
No justification down.
No additional dot row justification down.
Data to be printed at 0.4 inches (1.02 cm) high.
Indicates a change in character height.
New character height of 0.2 inches (0.51 cm).
Data to be printed at 0.2 inches (0.51 cm) high.
85
Comments to this Manuals
Latest comments: