Example 6: To place OPTION directly under GRAPHICS, a pass terminator
(^-^*) must be placed after the end of the first pass but before the
beginning of the second pass:
^M0404000GRAPHICS^-^*M0404053OPTION^- will now print:
Example 7: This example shows horizontal block characters with varying
degrees of justification.
The Graphics Pass: ^M0303060P^M0303040a^M0303020s^M0303000s^-
prints:
•
First Command - ^M0303060
^M
03
03
06
0
P
•
Second Command - ^M0303040a
^M
03
03
04
0
Horizontal orientation of characters.
Character height of 0.3 inches (0.76 cm).
Character width of 0.3 inches (0.76 cm).
Justified down 0.6 inches (1.5 cm).
No additional dot rows of justification.
Data to be printed.
Horizontal orientation of characters.
Character height of 0.3 inches (0.76 cm).
Character width of 0.3 inches (0.76 cm).
Justified down 0.4 inches (1.0 cm).
No additional dot rows of justification.
31
Comments to this Manuals
Latest comments: