Tally Genicom 6600 User Manual [Page 191]: Delete Form Command (normal)
Tally genicom printer user manual.
Delete Form Command (Normal)
This command is used in NORMAL Mode to delete a stored form from
memory.
Field
Command Specifier
DELETE
FORM;
NAME
Parameter that specifies desired
Form to delete.
Delete Logo Command (Normal)
This command is used in NORMAL Mode to delete a stored logo from
memory.
Field
Command Specifier
DELETE
LOGO;
NAME
Parameter that specifies desired
Logo to delete.
Table 25. Delete Form Command
Function
Table 26. Delete Logo Command
Function
Option/Modifier Selections
Enter the current Special Function Control
Character, followed by DELETE FORM,
then end the entry with the parameter
delimiter.
Enter the name of a specific form you want
to delete or *ALL to delete all forms.
Option/Modifier Selections
Enter the current Special Function Control
Character, followed by DELETE LOGO,
then end the entry with the parameter
delimiter.
Enter the name of a specific form you want
to delete or *ALL to delete all logos.
191
Comments to this Manuals
Latest comments: