which prints:
Primary Metals Form
Similar to the AIAG form, the Primary Metals form utilizes both barcode and
human-readable characters to create a standard label for shipping and
identification. The barcode portions of this form can be printed in either the
High Density or Low Density mode:
The command to select Half Dot Mode is METALS_H.MT.
The command to select Full Dot Mode is METALS_F.MT.
The following rules apply when using the METALS forms:
1. If a data field is not completely filled with data, the data for that field must
be terminated with ^-, ^*, or ^+.
2. If the data field requires both a human-readable field and a barcode field,
the same value must be sent for both fields.
111
Comments to this Manuals
Latest comments: