Single n/180 Inch or n/216 Inch Line Feed
Single n/180 Inch or n/216 Inch Back Feed
Data Structure
ASCII
hex.
dec.
ASCII
hex.
dec.
–
Description
When the printer receives this code sequence it advances the paper by
(24 needle printer) or by
a CR (reset line pointer).
—
When the printer receives this code sequence it moves the paper backwards by
n
Unlike an ordinary line feed code, code ESC J does not advance the paper to the top of
the next page when the print position enters the perforation area (Perforation-skip operati-
on is not performed). The value specified for n must be in the range of 0 to 255. This code
sequence does not affect the amount by which the paper is advanced by subsequent LF
or VT codes.
98
Miscellaneous
ESC "J"
<n>
1B
4A
<n>
27
74
<n>
ESC "j"
<n>
1B
6A
<n>
27
106 <n>
⁄
inches (24 needle printer) or by
180
n/180 inch line feed
n/216 inch line feed
n/180 inch back feed
n/216 inch back feed
⁄
n
inches (9 neadle printer). This sequence does not effect
216
⁄
n
inches (9 needle printer).
216
ESC J
ESC j
–
—
⁄
n
inches
180
Comments to this Manuals
Latest comments: