Sign in today to find solutions:

Don't have an account? Sign up

Sylvania SMP2012 User Manual

Sylvania mp3 player user manual.

SMP2012
User Manual
Sylvania is a registered trademark of OSRAM Sylvania Inc. Used under license.
2. Unique Features
1. Elegant appearance and easy to use
2. Multi-Code Player - Supporting MP1, MP2, MP3, WMA
formats
2.3 Drive Free U Disk - You may manage your files directly through
"Portable
Device" in "My Computer" on Windows2000 Operating
System or above without driver
4. Function of the button
1.Make sure the switch is ON
2.Switch on the power button and it will start to play automatically
3.Hold PLAY to turn off the player when the player is working
4.Switch on the power button to resume the song
5.Short Press PLAY to pause when file is playing
6.The LED light 1 is on when playing music
6. Trouble Shooting
6. Trouble Shooting
6. Trouble Shooting
- Check to see if battery is low
- Check to see if battery is low
- Check to see if battery is low
No Power
No Power
No Power
- Check to see if the player is ON
- Check to see if the player is ON
- Check to see if the player is ON
- Check to see Volume is set "0" and connect the
- Check to see Volume is set "0" and connect the
- Check to see Volume is set "0" and connect the
earphone connects properly
earphone connects properly
earphone connects properly
- Make sure earphone is clean and in good status
- Make sure earphone is clean and in good status
- Make sure earphone is clean and in good status
No sound from earphone
No sound from earphone
No sound from earphone
- Damaged MP3 file may make noise and could not
- Damaged MP3 file may make noise and could not
- Damaged MP3 file may make noise and could not
be played. Make sure that the music file are not
be played. Make sure that the music file are not
be played. Make sure that the music file are not
damaged
damaged
damaged
- Check to see if USB cable is damaged and
- Check to see if USB cable is damaged and
- Check to see if USB cable is damaged and
connected properly
connected properly
connected properly
Failure of music download
Failure of music download
Failure of music download
- Check to see if driver is installed correctly
- Check to see if driver is installed correctly
- Check to see if driver is installed correctly
- Check to see if memory space is enough
- Check to see if memory space is enough
- Check to see if memory space is enough
1. Overview
Vol- button
Backward button
USB port
ON/OFF button
LED light 2
3. Play Music
Connect the earphone to player
1. Put the Power switch to ON
1.1
Select music
: To select previous music
: To select next music
2. To adjust the volume
2.1 Press+/- to adjust volume
5. USB Disk
1.USB Disk
The player could be use as standard USB disk with operating
4. Voice Play
system of Windows 2000 and above, Mac OS 10.3 and above,
Linux Redhat 8.0 and above (no driver needed) while Windows 98
need to set up driver
2. Battery
2.1 Make sure the power switch is on to charge, or the player
could not be charged properly. The LED light 2 and LED light 1
are on when the player is charging, the light 1 will be off when
the battery is full
2.2 Disconnect the player and charger if you want to stop charging
2.3 Turn off the player when you do not use player
3. Remarks (Additional information for Adaptor purchase)
3.1 The adaptor must be conformed to following standard
3.1.1 Input: 100V - 240V, 50/60Hz
3.1.2 Output: 5.2V
0.2V
3.1.3 Max.: 350mA
3.1.4 4 pins adaptor
Shorted and Touch
GND
7. Technical Specifications
2GB
Capacity
NA
Display
Interface
USB 2.0 High Speed
Max Playtime
Up to 4hrs
Battery Type & Capacity
Li-Polymer Rechargeable 3.7V 120mAh
Mp1, MP2 ,MP3, WMA
File Type
S/N ratio
85~95Db
Power Output
(L)5mW + (R)5mW(320hm)
Compatible with Windows2000/ XP
Operating System
Dimensions
44.2 x 29.5 x 12.7
18g
Weight
Forward button
Vol+ button
Play/Pause button
Earphone jack
LED light 1
Output DC 5V 2
Empty

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: