Page of 4
Download Bookmark Comment

Sylvania QUICKTRONIC POWERSENSE T5 User Manual

Sylvania indoor furnishings user manual.
www.sylvania.com
QUICKTRONIC
®
T5 Dimming UNV Systems
High Efficiency Series
Lamp / Ballast Guide
28W T5 - PENTRON
®
2-lamp QTP2x28T5/UNV DIM
Primary Lamp Type
FP28
Also operates:
FP35, FP21, FP14
Key System Features
• Industry's first ballast that combines
dimming inputs from 0-10V and/
or two-wire AC dimming providing
maximum flexibility
• POWERSENSE compatibility with low
voltage and power line dimmers
• High Efficiency
• Lamp Detection Technology
• Universal voltage (120-277V)
• 100-1% Dimming Range
• PROStart
programmed rapid start
®
• Anti-flash circuitry – turns on in
dimmed mode
• Lightweight and low profile
• Operates at >42kHz
• QUICKSENSE ballast technology
(end-of-lamp-life sensing)
• QUICK 60+ ballast and lamp warranty
• RoHS compliant
• Lead-free solder, printed circuit
board and manufacturing process
Application Information
SYLVANIA QUICKTRONIC
POWERSENSE ballast
is ideally suited for:
• Occupancy sensors
• Daylight harvesting
• Energy management
• Load shedding
• Commercial
• Retail
• Hospitality
• Institutional
• Schools
• New construction
• Retrofit
ECS238 – 1/2011
POWERSENSE
®
SYLVANIA QUICKTRONIC POWERSENSE
ballasts operate linear fluorescent T5 lamps
over a wide (100-1%) dimming range and
provide true versatility in controls selection.
QUICKTRONIC POWERSENSE ballasts
feature micro-controller technology to offer
the industry's most adaptable dimming
ballast. Compatibility with low voltage
controls, power line dimmers and any line
voltage from 120V to 277V, provides the
flexibility to greatly simplify the specifi-
cation, purchasing and installation process.
Patented lamp detection technology
delivers unmatched performance.
Variations in brightness from lamp-to-
lamp are virtually eliminated, providing
uniform lighting throughout the dimming
range. At light levels of >75% unnec-
essary lamp-coil power is turned off,
delivering energy efficiences comparable
to non-dimming Instant start electronic
ballast. This technology also eases instal-
lation and troubleshooting by recognizing
failed lamps, faulty wiring or loose
System Information
QUICKTRONIC POWERSENSE ballasts
operate from standard low voltage
(0-10VDC) fluorescent controllers or
compatible 2-wire power line fluorescent
dimmers, making them ideal for
individual office lighting or automated
building applications, both in new
construction and retrofit projects.
For the individual office or conference
room, installation can be streamlined
by using a 2-wire power line dimmer;
eliminating the need for additional control
wires.
For more advanced systems, such as
daylight harvesting or building automation
applications, standard low voltage
devices (0-10VDC, Class 1 or 2) are used
to control the lighting system. In this
daylight harvesting example, each lighting
fixture (or fixture row) is controlled by
it's own photosensor; regulating the
connections, and shutting down. When
the problem is corrected, the system
restarts automatically.
All SYLVANIA Professional Series (QTP)
electronic ballasts feature high power
quality (<10% THD), lightweight, low
profile designs.
light output to compensate for changes
in natural daylight. Depending upon the
specific application, energy savings of
up to 60% compared to fixed output
electronic systems can be realized.
Daylight Harvesting Scenario
Fixture
Light Sensor 1
1
Electronic T5
Fluorescent Controllable
Lighting Systems
These ballasts are RoHS compliant and
feature lead-free solder, printed circuit
boards and manufacturing process.
Setting the standard for quality,
QUICKTRONIC POWERSENSE ballasts are
covered by the QUICK 60+
warranty,
®
the first and most comprehensive lamp &
ballast system warranty in the industry.
All QUICKTRONIC POWERSENSE ballasts
include a line voltage protection circuit,
which protects the ballast in the event
that line voltage is inadvertently applied
to the low voltage control inputs.
Fixture
Fixture
Light Sensor 2
Light Sensor 3
3
2
Desired Illuminance E r
Constant setpoint value

   Related Manuals for Sylvania QUICKTRONIC POWERSENSE T5

   Summary of Contents for Sylvania QUICKTRONIC POWERSENSE T5

  • Page 1

    ECS238 – 1/2011 ® connections, and shutting down. When the problem is corrected, the system restarts automatically. All SYLVANIA Professional Series (QTP) electronic ballasts feature high power quality (<10% THD), lightweight, low profile designs. light output to compensate for changes in natural daylight.

  • Page 2

    The Watt Stopper, Inc 800-879-8585 www.wattstopper.com Please contact controls manufacturers to order/specify controls. For the latest controls list go to www.sylvania.com Also for more information, check out the LCA (Lighting Controls Association) site: www.aboutlightingcontrols.org WARNING: Install and wire these ballast and controls in accordance with the National Electrical Code (NEC), all applicable Federal, State and local electrical codes, as well as the specific instructions provided with the compatible control that you purchased.

  • Page 3

    Photo Photo 0-10V 0-10V Sensor Sensor Control Control 0-10V 0-10V OSRAM SYLVANIA National Customer Service and Sales Center 1-800-LIGHTBULB (1-800-544-4828) www.sylvania.com Specifications subject to change without notice. Type 0-10Vdc Control with POWERSENSE Ballasts Black Black Black DIMMING White White Violet (+)

  • Page 4

    SYLVANIA, PENTRON, QUICKSENSE, the system solution, QUICK60+, PROStart, POWERSENSE and See the World in a New Light are registered trademarks of OSRAM SYLVANIA Inc. ELOGIC is a trademark of OSRAM SYLVANIA Inc. QUICKTRONIC is a registered trademark of OSRAM GmbH.

Comments to this Manuals

Symbols: 0
Latest comments: