Sylvania SGPD432 User Manual page 7

Sylvania gps receiver user manual
Hide thumbs Also See for SGPD432:
Table of Contents

Advertisement

In this interface, click the icons on the screen to enter the corresponding functions; and
click the arrow on the right bottom to turn the page. There will be an animation effect when
turning the page.
Battery Status Icon:
Full======================================================>Drained
When the battery is at low power level, please charge it immediately to ensure the
device work normally.
Charging:
Warnings for charging:
1. A new battery may be empty and not charged before you get the device.
2. To achieve the best performance of the battery, it is better to charge it up to 8 hours in
the first three times, but not over 16 hours.
3. In normal charging with DC charger, please make sure to charge it for 2 – 2.5 hours to
get it fully charged.
A new battery will reach its best performance after a number cycles of charging and
discharging. If the device is not used for long time, it is better to charge it to full capacity
every 2 or 3 months during storage.
Charger Application:
DC Charger:
Take out the DC charger, plug it into the wall outlet with AC 110V~240V, then plug in the
DC jack into the device DC-in jack.(see the illustration below).
Car Lighter Charger:
Please insert the car charger into car cigarette lighter jack, then plug into the USB
jack(see the illustration below).
6

Advertisement

Table of Contents
loading

Table of Contents