Ignition Switch; Blower Switch; Horn Switch - Supra User Manual

Supra boat user manual
Table of Contents

Advertisement

Ignition Switch

Located on the port side of the dashboard, the ignition switch
has three positions. In the vertical position the ignition is OFF.
With the key in, turn the ignition switch one notch to the right
to check all electrical equipment, including blower, pump, and
lights. Turn the ignition all the way to the right to operate the
starter.
NOTE: All electrical equipment should be turned off when
the boat is in storage.

Horn Switch

The Horn Switch is located on the port dash panel near
the ignition. Sound the horn by depressing the button.
© 2006 Skier's Choice, Inc.

Blower Switch

The blower switch activates the blower motor. The primary
function of the blower fan is to remove any fumes from the
bilge area. The blower also draws fresh air into the engine
compartment.
Never depend solely on the blower to eliminate dangerous
fumes. Before starting the engine, always open the motor
box to check if fumes are present. Switch on the blower fan a
minimum of four minutes before starting the engine.
NOTICE: If the blower fails to operate, reset the circuit
breaker. If the blower still does not operate, notify your
Supra dealer.
Failure to operate the blower in accordance with the Coast
Guard Recommendation could result in an explosion.
Horn/Whistle Signals
One Long Blast:
Warning Signal (Coming out of slip)
One Short Blast:
Pass on my Port Side
Two Short Blasts:
Pass on my Starboard Side
Three Short Blasts:
Engines in Reverse
Four or More Blasts:
Danger Signal
1. OVERTAKING / PASSING: Boat being passed has the
right-of-way. KEEP CLEAR.
2. MEETING HEAD-ON: Keep to the right.
3. CROSSING: Boat on the right has the right-of-way. slow
down and permit him to pass.
39 —

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents