Sunbeam Mixmaster MX001 Instruction/Recipe Booklet page 7

Using your Sunbeam Mixmaster (continued)
Note: Be sure both beaters or dough
hooks click firmly in place, you may need
to twist the attachments slightly to
engage them in position prior to pushing
them into place.
4. Depending on the amount of ingredients
required for mixing, select bowl size by
placing the turntable into either of the
two holes on the base of the Mixmaster
stand, see Figure 5.
Figure 5
Small bowl selected
Large bowl selected
5. Press 'head locking' button to lower the
head with the selected attachments
(either, beaters or dough hooks) in place,
into the mixing bowl. See Figures 6 & 7.
Figure 6
Press locking
button down
and tilt mixer
head forward
Figure 7
Using your Mixmaster
1. With the speed control dial in the OFF
position, plug the power cord into a
230-240 volt power outlet.
2. Use the speed control dial to turn the
Mixmaster ON and OFF and to control
the mixing speeds.
Clearly marked instructions for correct
mixing speeds for each type of mixture are
shown in the 'Mixing Guide' on page 7.
Tip: Start mixing at slow speeds and increase
speed gradually to prevent ingredients
splashing out of the mixing bowl.
When adding dry ingredients, particularly
flour, lower the speed temporarily until
ingredients are combined.
Tip: When kneading yeast doughs, use
speed 1 to achieve best results. For
specific instructions for the use of dough
hooks see 'Helpful Hints for a Successful
Dough' on page 13.
5