Table of Contents
Advertisement
Fitting/using the tools on your
Oskar
™
Note: All attachments must be firmly
attached to the spindle. Always adjust the
attachments until you are sure that they are
correctly fitted.
Placing the spindle
1. F it the spindle onto the drive shaft and
ensure the blade locks into place, see
figure 4.
Fig 4
Processing blade
1. F it the processor bowl and spindle as
detailed previously in figures 1, 2 & 4.
2. F it the processing blade over the spindle
and press firmly into place, see figure 5.
Fig 5
Mini
Warning: Use caution, as blades are sharp.
Always handle the processing blade by its
central plastic section.
4. P lace food into the processing bowl.
5. F it the processing cover to the processing
bowl, see figure 3 and place the food
pusher in the feed tube.
6. P lug the power cord into a 230-240V AC
power outlet and turn the power 'ON'.
7. S tart processing using the On/Off or Pulse
buttons.
8. W hen processing is complete, remove the
spindle and blade from the processing bowl
before removing the processed food.
11
Hide quick links:
Advertisement
Table of Contents
