Download Print this page

CHICAGO D/36A Centrifugal Fan Operating And Maintenance Instructions

Advertisement

Quick Links

SAFETY - INSTALLATION - OPERATING
AND MAINTENANCE INSTRUCTIONS
INDUSTRI L CENTRIFUG L F NS
This Manual is for the following Fans: D/10A and D/36A (SQA/SQB, SQAD/SQBD), Centrifugal Airfoil and "B" Wheel Fans; D/16A,
D/39A (SQI), and D/52 Industrial Fans; D/44 Plug Fans; D/51 Double Width, Single Width and Plenum Fans; D/53 Pressure Blowers,
D/5120 Plenum Fans; D/64 PBI (Packaged Backward Inclined); D/70 Plug Fan.
D/36A Centrifugal Fan
D/70 Plug Fan
Spare or repair parts may be ordered from your nearest "Chicago" Sales Engineer by giving the part name, (Wheel, Motor, Bearing,
TO ORDER
SPARE PARTS:
etc.) and the FAN SERIAL NUMBER taken from the nameplate or the JOB ORDER drawings. If possible also give the bearing or
shaft size and the fan class. Due to the small number of parts required, spare parts lists are neither necessary nor available. Use
these instructions instead.
1675 GLEN ELLYN ROAD • GLENDALE HEIGHTS, ILLINOIS 60139
PHONE: 630/858-2600 • FAX: 630/858-7172
www.chicagoblower.com • E-mail: fans@chicagoblower.com
D/53 Pressure Blower
D/51 Double Width Fan
D/16A Industrial Fan
D/64 PBI
Bulletin IMI-GL 12/11

Advertisement

loading

Summary of Contents for CHICAGO D/36A Centrifugal Fan

  • Page 1 D/70 Plug Fan D/51 Double Width Fan D/64 PBI Spare or repair parts may be ordered from your nearest “Chicago” Sales Engineer by giving the part name, (Wheel, Motor, Bearing, TO ORDER SPARE PARTS: etc.) and the FAN SERIAL NUMBER taken from the nameplate or the JOB ORDER drawings. If possible also give the bearing or shaft size and the fan class.
  • Page 2 The fan which you have purchased is a rotating piece of equipment and can become a source of danger to life or cause injury if not properly When a carrier signs Chicago Blower Corporation’s bill of lading, the applied. The maximum operating temperature or speed for which this carrier accepts the responsibility for any subsequent shortages or fan is designed must not be exceeded.
  • Page 3 8. Chicago Blower requires that all appurtenances, including ductwork or b. Remove all bolts from the bushings. stacks, which are attached to the fan inlet or outlet, be independently c.
  • Page 4 Warranty: The warranty on Chicago Blower fans is our standard warranty. The warranty on the motor is that extended by the motor manufacturer.

This manual is also suitable for:

D/51 double width fanD/70 plug fanD/64 pbiD/53 pressure blowerD/16a industrial fan