Stamina 55-1539A Owner's Manual
Stamina 55-1539A Owner's Manual

Stamina 55-1539A Owner's Manual

Stamina products, inc therapy inversion system owner's manual

Advertisement

Quick Links

Owner's Manual
!
WARNING
!
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
55-1539A
STAMINA PRODUCTS
CAUTION: 1. Weight on this product should not exceed 300 lbs.
MADE IN CHINA
2. Class H equipment: This equipment is for home
use only. It is not for commercial use.
Product May Vary Slightly
From Pictured.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service
1 (800) 375-7520
www.staminaproducts.com
2008, 06
2008 Stamina Products, Inc.

Advertisement

Table of Contents
loading

Summary of Contents for Stamina 55-1539A

  • Page 1 2. Class H equipment: This equipment is for home use only. It is not for commercial use. Product May Vary Slightly From Pictured. This Product is Produced Exclusively by 2040 N. Alliance, Springfield, MO 65803 Customer Service 1 (800) 375-7520 www.staminaproducts.com 2008, 06 2008 Stamina Products, Inc.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Safety Instructions Before You Begin Equipment Warning & Notice Labels Hardware Identification Chart Assembly Instructions Operational Instructions SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following safety instructions before using the Therapy Inversion System. Do not use the Therapy Inversion System alone.
  • Page 3: Customer Service

    Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time. Friday, 8:00 A.M. - 3:00 P.M., Central Time. TELEPHONE ONLINE MAIL CUSTOMER SERVICE CUSTOMER SERVICE CUSTOMER SERVICE STAMINA PRODUCTS, INC. Tel: 1 (800) 375-7520 Fax: (417) 889-8064 parts@staminaproducts.com ATTN: Customer Service customerservice@staminaproducts.com P.O. Box 1071 www.staminaproducts.com...
  • Page 4: Before You Begin

    BEFORE YOU BEGIN Thank you for choosing the Therapy Inversion System. We take great pride in producing this quality product and hope it will provide many hours of quality exercise to make you feel better, look better, and enjoy life to its fullest. It's a proven fact that a regular exercise program can improve your physical and mental health.
  • Page 5: Equipment Warning & Notice Labels

    EQUIPMENT WARNING & NOTICE LABELS Therapy Inversion System. This chart is provided to help identify the warning & notice labels on the Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size WARNING LABEL(61)
  • Page 6: Hardware Identification Chart

    HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers, the ends of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws.
  • Page 7: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed.
  • Page 8 ASSEMBLY INSTRUCTIONS STEP 4 Attach the FOOTREST(13) onto the HEIGHT ADJUSTMENT BEAM(12) with the ADJUSTMENT KNOB(24). NOTE: The four adjustment holes in the FOOTREST(13) allow the FOOTREST(13) to be attached in four different positions. Start with one of the center positions and adjust if necessary. Use the outer position if users are taller than average.
  • Page 9 ASSEMBLY INSTRUCTIONS Buckle Buckle STEP 7 Install the HEIGHT ADJUSTMENT BEAM(12) into MAIN FRAME(4) by pulling the SPRING PIN(22) on the MAIN FRAME(4) and inserting the HEIGHT ADJUSTMENT BEAM(12) as shown. For added safety, thread the SECURING KNOB(23) into the back side of the MAIN FRAME(4). WARNING: Do not use the Therapy Inversion System until you have verified your height setting.
  • Page 10 ASSEMBLY INSTRUCTIONS (10) Handrail Shaft RIGHT STEP 10: Slide the LEFT and RIGHT PROTECTIVE COVERS(26, 27) onto each side of the BASE ASSEMBLY. Make sure the SHAFTS on the FRONT FRAME(1) poke out through the hole on the PROTECTIVE COVERS(26, 27). NOTE: Do not secure the PROTECTIVE COVERS(26, 27) to the FOLDING LINKAGES(3) with the SECURING STRAPS on the covers until STEP 12.
  • Page 11: Operational Instructions

    OPERATIONAL INSTRUCTIONS GENERAL PRECAUTIONS Do not use the Therapy Inversion System alone. Always have a helper available in case assistance is needed in recovering from the decline position. Make sure that the FOAM PADS(16) and HEEL HOLDERS(19) are holding your feet securely. Make sure that the HEIGHT ADJUSTMENT BEAM(12) is properly set for your height.
  • Page 12: Using The Inversion Table

    OPERATIONAL INSTRUCTIONS HEEL HOLDER USE AND ADJUSTMENT Place your feet on the FOOTREST(13) with your ankles between the HEEL HOLDERS(19) and FOAM PADS(16). The HEIGHT ADJUSTMENT BEAM(12) includes a LEVER(56) to grip and release your feet. Pull the LEVER(56) toward you until your ankles are securely held between the HEEL HOLDERS(19) and FOAM PADS(16).
  • Page 13: Maintenance Instructions

    OPERATIONAL INSTRUCTIONS SUGGESTIONS FOR USE Begin slowly; invert only 15-20 degrees to begin with. Stay inverted only as long as you are comfortable. Return upright slowly. Make gradual changes: increase the angle only if it is comfortable. Increase the angle only a few degrees at a time.
  • Page 14: Product Parts Drawing

    PRODUCT PARTS DRAWING BACK FRONT...
  • Page 15: Parts List

    PARTS LIST DIAGRAM# PART NAME Front Frame Rear Frame Folding Linkage Main Frame Left Pivot Arm Right Pivot Arm Linkage Left Handrail Support Right Handrail Support Handrail Locking Knob Height Adjustment Beam Footrest Inner Pad Tube Outer Pad Tube Foam Pad Heel Holder Tube Heel Holder Bracket Heel Holder...
  • Page 16 PARTS LIST DIAGRAM# PART NAME Bolt, Hex Head (M8 x 1.25 x 20mm) Nylock Nut (M6 x 1) Nylock Nut (M8 x 1.25) Washer (M6) Washer (M8) Large Washer (M8) Large Washer (M6) Bolt, Round Head (M6 x 1 x 10mm) Support Washer Lever Hand Grip...
  • Page 17: Warranty

    To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield Missouri, USA, 65801-1071, or email us at customerservice@staminaproducts.com, or call us at 1 (800) 375-7520.
  • Page 18: Notes

    NOTES...
  • Page 19: Fax/Mail Ordering Form

    PART # EXAMPLE: CUSTOMER SERVICE CUSTOMER SERVICE Fax: (417) 889-8064 parts@staminaproducts.com customerservice@staminaproducts.com www.staminaproducts.com Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 State: Work Phone #: ( DESCRIPTION Rear Unit Assembly ONLINE MAIL STAMINA PRODUCTS, INC.

Table of Contents