1. Manuals
  2. Brands
  3. Stamina Manuals
  4. Exercise Bike
  5. fusion 15-7250
  6. Owner's manual

Stamina fusion 15-7250 Owner's Manual

Stamina magnetic exercise bike owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

CAUTION:
Weight on this product should not exceed 300 lbs.
2008, 08
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service
1 (800) 375-7520
www.staminaproducts.com
Owner's
Manual
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not followed.
Keep others and pets away
from equipment when in use.
Always make sure all bolts and
nuts are tightened prior to
each use. Follow all safety
instructions in this manual.
When calling for parts or
service, please specify the
following number :
Model#: 15-7250
STAMINA PRODUCTS
MADE IN CHINA
Product May Vary Slightly
From Pictured.
2008 Stamina Products, Inc.

Advertisement

Table of Contents
loading

Related Manuals for Stamina fusion 15-7250

Summary of Contents for Stamina fusion 15-7250

  • Page 1 Follow all safety instructions in this manual. When calling for parts or service, please specify the following number : Model#: 15-7250 STAMINA PRODUCTS MADE IN CHINA Product May Vary Slightly From Pictured. 2008 Stamina Products, Inc.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Safety Instructions Before You Begin Equipment Warning & Notice Labels Hardware Identification Chart Assembly Instructions Set Up Instructions Operational Instructions Computer Instructions SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following Safety Instructions before using the Magnetic Fusion 7250 Bike.
  • Page 3 Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time. Friday, 8:00 A.M. - 3:00 P.M., Central Time. TELEPHONE ONLINE MAIL CUSTOMER SERVICE CUSTOMER SERVICE CUSTOMER SERVICE STAMINA PRODUCTS, INC. Tel: 1 (800) 375-7520 Fax: (417) 889-8064 customerservice@staminaproducts.com ATTN: Customer Service www.staminaproducts.com P.O. Box 1071 Springfield, MO. 65801-1071...

  • Page 4: Before You Begin

    BEFORE YOU BEGIN Thank you for choosing the Magnetic Fusion 7250 Bike. We take great pride in producing this quality product and hope it will provide many hours of quality exercise to make you feel better, look better, and enjoy life to its fullest. It's a proven fact that a regular exercise program can improve your physical and mental health.

  • Page 5: Equipment Warning & Notice Labels

    EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the Magnetic Fusion 7250 Bike. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size WARNING LABEL(109)

  • Page 6: Hardware Identification Chart

    HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws.

  • Page 7: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed.
  • Page 8 ASSEMBLY INSTRUCTIONS Rear Frame(5), is inside of Rear Covers(65, 66) STEP 3 Attach the REAR STABILIZER(6) to the REAR FRAME(5) with BUTTON HEAD BOLTS(M8x1.25x53mm) (72), LOCK WASHERS(M8)(100), and WASHERS(M8)(103). STEP 4 Slide the FOOT CAPS(63) onto both ends of the REAR STABILIZER(6) so they fit over the edges of the LEFT and RIGHT REAR COVERS(65, 66) and secure with ROUND HEAD SCREWS(M4x0.7x15mm)(85).
  • Page 9 ASSEMBLY INSTRUCTIONS STEP 6 Attach the SEAT FRAME(8) to the SEAT CARRIAGE(7) with BUTTON HEAD BOLTS(M10x1.5x200mm)(76), WASHERS(M10)(99), LOCK WASHERS(M10)(101), and ACORN NUTS(M10x1.5)(97). STEP 7 NOTE: The PULSE SENSOR WIRES(55) go through the tube of the HANDRAIL(9). Be careful not to damage the wires when inserting the BUTTON HEAD BOLTS(M8x1.25x45mm)(71) through the holes in the HANDRAIL(9) when attaching it to the SEAT CARRIAGE(7).
  • Page 10 ASSEMBLY INSTRUCTIONS STEP 9 Attach the SEAT(59) and BACK CUSHION(60) to the SEAT FRAME(8) with ROUND HEAD BOLTS (M6x1x38mm)(82). STEP 10 Refer to the inset drawing. Press the NUT CAPS(M10)(53) onto the NYLOCK NUTS(M10x1.5)(95) on both sides of the SEAT CARRIAGE(7).
  • Page 11 ASSEMBLY INSTRUCTIONS STEP 11 NOTE: The RIGHT PEDAL(41) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(41) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(39) has L stamped on the end of the pedal shaft. The LEFT PEDAL(39) has left hand threads and is tightened by turning counterclockwise.
  • Page 12 ASSEMBLY INSTRUCTIONS Socket of Power Wire(28) STEP 13 Refer to illustration A. Run the CONNECTION WIRE(26) through the hole in the plate on the HANDLEBAR(4). Attach the HANDLEBAR(4) to the UPRIGHT(3) with BUTTON HEAD BOLT(M8x1.25x40mm)(70) and FLAT HEAD SCREWS(M6x1x12mm)(78). STEP 14 Plug the CONNECTION WIRE(26) into the EXTENSION WIRE on the COMPUTER(27).

  • Page 13: Set Up Instructions

    SET UP INSTRUCTIONS Place the Magnetic Fusion 7250 Bike in the area where it will be used. It is recommended that the Magnetic Fusion 7250 Bike be placed on an equipment mat. The Magnetic Fusion 7250 Bike is approximately 55 3/4 inches long x 24 3/8 inches wide x 50 3/8 inches tall (max.).

  • Page 14: Operational Instructions

    OPERATIONAL INSTRUCTIONS SEAT ADJUSTMENT Proper seat adjustment is important. There are nine adjustment holes in the SEAT RAIL(45). These adjustment holes allow users to adjust the position of the seat for efficient exercise. Rotate the ADJUSTMENT KNOB(49) counterclockwise until the pin releases when the knob is pulled. Pull the ADJUSTMENT KNOB(49) and slide the SEAT CARRIAGE(7) up or down to desired position.

  • Page 15: Computer Instructions

    COMPUTER INSTRUCTIONS Your Magnetic Fusion 7250 Bike utilizes a magnetic braking system to create resistance for your workout. You control the amount and pattern of this resistance by means of the advanced computer console mounted at the center of the handlebar. We recommend that you use this computer console to vary your workout from session to session and note your progress toward your fitness goals.
  • Page 16 COMPUTER INSTRUCTIONS PROGRAM NUMBER TIME SPEED DISTANCE LCD DISPLAY INSTRUCTIONS PROGRAM: Displays the selected program during exercise, from P1 to P12. TIME: Displays the time. Counts upward from one second to 99:59 minutes. Counts down from preset value. SPEED: Displays the current speed from zero to 99.9 miles per hour. DISTANCE: Displays the distance from zero to 999.9 miles.
  • Page 17 COMPUTER INSTRUCTIONS PROGRAM DESCRIPTIONS This computer contains 12 different programs. You can preset the program time and the computer will divide the time chosen into 10 intervals. If you do not set the program time in advance, the computer will default to a 30 minute workout time.
  • Page 18 COMPUTER INSTRUCTIONS HEART RATE CONTROL PROGRAMS: P11 and P12 are preset automatic Heart Rate Control Programs. You must input your age and always hold the pulse sensors on the HANDRAIL(9) with both hands when using the Heart Rate Control Programs. P11 is programmed to use 60% of your maximum heart rate as your target heart rate zone workout goal, and P12 is programmed to use 85% of your maximum heart rate as your target heart rate zone workout goal;...
  • Page 19 COMPUTER INSTRUCTIONS COMPUTER OPERATION STEP 1: POWER ON Pedaling or press any button. STEP 2 : SELECT PROGRAM Select and press one of the PROGRAM BUTTONS to enter the desired program. STEP 3: SET THE PROGRAM TIME OR CALORIE (and input age for Heart Rate Control Programs) The TIME function mode will appear with the display flashing "0:00".

  • Page 20: Storage

    The right pedal has right hand threads that are tightened by turning clockwise. Verify that the WARNING LABEL(109) is in place and easy to read. Call Stamina Products immediately at 1-800-375-7520 for a replacement WARNING LABEL(109) if it is missing or damaged.

  • Page 21: Conditioning Guidelines

    CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive for several years or are severely overweight, start slowly and increase your workout time gradually. Increase your workout intensity gradually by monitoring your heart rate while you exercise. Remember to follow these essentials: Have your doctor review your training and diet programs.

  • Page 22: Warm-Up And Cool-Down

    WARM-UP and COOL-DOWN Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump rope, and running in place Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength...

  • Page 23: Warranty

    To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield Missouri, USA, 65801-1071, or email us at customerservice@staminaproducts.com, or call us at 1-800-375-7520.

  • Page 24: Product Parts Drawing

    PRODUCT PARTS DRAWING FRONT BACK...

  • Page 25: Parts List

    PARTS LIST PART# PART NAME Front Frame Front Stabilizer Upright Handlebar Rear Frame Rear Stabilizer Seat Carriage Seat Frame Handrail Pulley and Axle Bearing (6003Z) Bearing Washer (M17) C Ring (17mm) V-Ribbed Belt Idler Arm Idler Wheel Idler Wheel Spacer Tension Spring Magnetic Unit Lock Washer (3/8")
  • Page 26 PARTS LIST PART# PART NAME Hand Grip Round Dome Plug (25.4mm) Seat Back Cushion Foam Grip Wheel Foot Cap Foot Stand Left Rear Cover Right Rear Cover Cover Plug Stand Screw, Round Head (M4 x 50mm) Bolt, Button Head (M8 x 1.25 x 40mm) Bolt, Button Head (M8 x 1.25 x 45mm) Bolt, Button Head (M8 x 1.25 x 53mm) Bolt, Button Head (M10 x 1.5 x 15mm)

  • Page 27: Fax/Mail Ordering Form

    PART # EXAMPLE: CUSTOMER SERVICE CUSTOMER SERVICE Fax: (417) 889-8064 customerservice@staminaproducts.com www.staminaproducts.com Detach and Mail or Fax the Form Below Stamina Products, Inc. P.O. Box 1071 Springfield, MO 65801-1071 State: Work Phone #: ( DESCRIPTION Rear Unit Assembly ONLINE MAIL STAMINA PRODUCTS, INC.

This manual is also suitable for:

Fusion 7250

Table of Contents