Using The Battery Pack; Uso Del Paquete De Batería - Sony GV-D900 Operating Instructions (primary manual) Operating Instructions Manual

Digital video cassette recorder
Hide thumbs Also See for GV-D900 Operating Instructions (primary manual):
Table of Contents

Advertisement

Using alternative power
sources

Using the battery pack

This VCR operates with the "InfoLITHIUM"
battery pack (not supplied). If you use any other
battery pack to operate your VCR, the VCR may
not operate or the battery life may be shortened.
"InfoLITHIUM" is a trademark of Sony
Corporation.
Charging the battery pack
(1)Set the mode change switch to CHARGE.
(2)Connect the mains lead to mains. The beep
sounds and the display window lights up.
(3)Install the battery pack. Charging begins.
When the remaining battery indicator
becomes
and the CHARGE lamp lights
up, normal charge is completed. For a full
charge, which allows you to use the battery
slightly longer than "normal charge," leave
the battery pack attached until the CHARGE
lamp goes out and the remaining battery
indicator becomes
(4)Remove the battery pack. The battery pack
can be used even if the charging is not
completed.
Remaining battery indicator
Normal charge
1
14
.
Full charge
3
2
CHARGE
Uso de fuentes de
alimentación alternativas
Uso del paquete de batería
Esta videograbadora funciona con el paquete de
batería "InfoLITHIUM" (no suministrado). Si
utiliza otro tipo de paquete para emplear la
videograbadora, es posible que ésta no funcione
o que la duración de la batería se reduzca.
"InfoLITHIUM" es una marca comercial de Sony
Corporation.
Carga del paquete de batería
(1)Ajuste el interruptor de modo en CHARGE.
(2)Conecte el cable de alimentación a la toma de
corriente. La unidad emite un pitido y el visor
se ilumina.
(3)Instale el paquete de batería. Se inicia la carga.
Cuando el indicador de batería restante
muestre
y el indicador CHARGE se
ilumine, significa que la carga normal ha
finalizado. Para obtener una carga completa,
que permite utilizar el paquete durante un
espacio de tiempo ligeramente superior que la
"carga normal", deje dicho paquete fijado
hasta que el indicador CHARGE se apague y
el indicador de batería restante aparezca como
.
(4)Extraiga el paquete de batería. Éste puede
utilizarse aunque la carga no haya finalizado.
Indicador de batería restante
Carga normal
Carga completa
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents