Sony STR-DE835 Service Manual page 32

IC1503 AK4526A A/D,D/A CONVERTER (DIGITAL BOARD)
Pin No. Pin Name I/O
1 SDOS I
I
2 MCLK
3 S/M I
4 BCLK I/O
5 LRCK I/O
6 SDT11 I
7 SDT12 I
8 SDT13 I
9 SDTO O
10 DAUX I
11 DFS I
12 – 13 DEM1 – DEM0 I
14 MCKO O
15 D. 5V —
16 D. GND —
17 PD I
18 TEST I
19 ICKS1 I
20 ICKS0 I
21 CAD1 I
22 CAD0 I
23 LOUT3 O
24 ROUT3 O
25 LOUT2 O
26 ROUT2 O
27 LOUT1 O
28 ROUT1 O
29 LIN– I
30 LIN+ I
SDTO source select pin
"L": internal ADC output, "H": DAUX input
ORed with serial control register if P/S = "L" (Connected to ground)
MCKO clock frequency select pin
"L": MCLK, "H": MCLK/2. ORed with serial control register if P/S = "L" (Connected to ground)
Audio data master/slave mode select pin
"L": slave mode, "H": master mode (Connected to ground)
Audio serial data clock pin
Input/output channel clock pin
DAC1 audio serial data input pin
DAC2 audio serial data input pin
DAC3 audio serial data input pin
Audio serial data output pin
AUX audio serial data input pin (Connected to ground)
Double speed sampling mode pin
"L": normal speed, "H": double speed
ORed with serial control register if P/S = "L" (Connected to ground)
De-emphasis pin
ORed with serial control register if P/S = "L" (Connected to ground)
Master clock output pin (Not used)
Digital power supply pin
Digital ground pin
Power-down & reset pin
When "L", the AK4526 is powered-down and the control registers are reset to default state.
If the state of P/S, M/S, CAD0-1 changes, then the AK4526 must be reset by PD.
X'tal oscillator select/test mode pin
"H": X'tal oscillator selected
"L": External clock source selected
"NC": If pin is floating then test mode is enabled. (Connected to ground)
Input clock select 1 pin (Connected to ground)
Input clock select 0 pin (Connected to ground)
Chip address pin
Used during the serial control mode. (Connected to ground)
Chip address pin
Used during the serial control mode. (Connected to ground)
Lch #3 analog output pin
Rch #3 analog output pin
Lch #2 analog output pin
Rch #2 analog output pin
Lch #1 analog output pin
Rch #1 analog output pin
Lch analog negative input pin
Lch analog positive input pin
— 54 —
Description