Step 2: Setting The Time - Sony MHC-GRX3/R300 Operating Instructions Manual

Step 2: Setting the
time
You must set the time before using the timer
functions.
You can set the time while the power is off.
For European models, the clock is on a
24-hour system.
For other models, the clock is on a 12-hour
(AM/PM) system.
The 24-hour system model is used for
illustration purpose.
1
DISPLAY/DEMO
1
Press CLOCK/TIMER SET.
The hour indication flashes.
6
3,5
2,4
2
Turn the jog dial to set the hour.
3
Press ENTER/NEXT.
The minute indication flashes.
4
Turn the jog dial to set the minute.
5
Press ENTER/NEXT.
The clock starts working.
To change the preset time
You can also change the time while the power
is on.
1 Press CLOCK/TIMER SET.
2 Turn the jog dial until "SET CLOCK"
appears, then press ENTER/NEXT.
3 Repeat steps 2 to 5 in "Setting the time".
Tips
• If you've made a mistake, start over from step 1.
• Setting the time deactivates the demonstration
mode.
If you want to display the demonstration mode,
press DISPLAY/DEMO when the power is off.