Page of 6

Black & Decker VEC010BD User's Manual

Black & decker power supply user manual.
Vec010BD_Manual_042905
5/9/05
TWO YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than those
described herein.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in
materials and workmanship for two years from the date of purchase without additional charge. The
warranty does not extend to subsequent purchasers or users. Vector Manufacturing will not be responsible
for any amount of damage in excess of the retail purchase price of the product under any circumstances.
Incidental and consequential damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to accessories or damage to
units from misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity power
sources.
RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned postage prepaid to
manufacturer. Any defective product, other than accessories, that is returned to manufacturer within 30 days
of the date of purchase will be replaced free of charge. If such a product is returned more than 30 days
but less than two years from the purchase date, manufacturer will repair the unit or, at its option, replace it
free of charge. If the unit is repaired, new or reconditioned replacement parts may be used, at Vector
Manufacturing's option. A unit may be replaced with a new or reconditioned unit of the same or
comparable design. The repaired or replaced unit will then be warranted under the terms of the remainder
of the warranty period. The customer is responsible for the shipping charges on all returned items after 30
days. During the warranty period, manufacturer will be responsible for the return shipping charges.
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from
normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or
exposure to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized
use or repair, neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire, flood and
Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department toll free at
(800) 618-5178 for general repair information and charges if applicable. You may also contact us through
our website at www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on
how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages,
so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal
rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Vector Manufacturing Technical Support
by telephone, fax or mail (see below). We suggest that you keep the original packaging in case you need
to ship the unit. When returning a product, include your name, address, phone number, dated sales receipt
(or copy) and a description of the reason for return and product serial number. After repairing or replacing
the unit, we will make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing.
Enter "VEC010BD" as Model and "Jump-Starter" as Product Type. All Vector Manufacturing products must
be registered within 10 days of purchase to activate this warranty. Mail the completed registration form,
along with a copy of the original sales receipt to:
ATTN.: CUSTOMER SERVICE
4140 SW 30th Ave., Ft. Lauderdale, FL 33312
• TOLL FREE: (800) 618-5178 • FAX: (954) 584-5556 •
© 2005 VECTOR MANUFACTURING
MADE IN CHINA
1:00 PM
Page 8
BD42905
8
START-IT
Jump-Starter
12 Volt DC Power Supply
Cordless • Rechargeable
KEY FEATURES:
• Rechargeable Jump-Start
System
• Easy-to-Read Charge
Indicators
• Emergency Area Light
• Keyless ON/OFF Power
Switch
• 12 Volt DC Accessory
Outlet
• Battery Status Check
USER'S MANUAL
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312 U.S.
Toll Free: (800) 618-5178
www.vectormfg.com
VEC010BD

   Related Manuals for Black & Decker VEC010BD

   Summary of Contents for Black & Decker VEC010BD

  • Page 1

    WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing. Enter “VEC010BD” as Model and “Jump-Starter” as Product Type. All Vector Manufacturing products must be registered within 10 days of purchase to activate this warranty. Mail the completed registration form, along with a copy of the original sales receipt to: ATTN.: CUSTOMER SERVICE...

  • Page 2

    Vec010BD_Manual_042905 5/9/05 1:00 PM Page ii IMPORTANT SAFETY INSTRUCTIONS 1. When working with lead acid batteries, always make sure immediate assistance is available in case of accident or emergency. 2. Always use protective clothing and eyewear when using this product, contact with battery acid may cause blindness and/or severe burns.

  • Page 3: Table Of Contents

    Vec010BD_Manual_042905 5/9/05 1:00 PM Page iv TABLE OF CONTENTS Introduction ........... 1 Features .

  • Page 4: Using The Unit As A Jump-starter

    Vec010BD_Manual_042905 5/9/05 1:00 PM Page 2 12 VOLT DC ACCESSORY OUTLET RECHARGING PORT BATTERY CHARGE STATUS INDICATORS 2-LED AREA LIGHT Battery Charge Status Indicators A series of three LED indicators (two red and one green) display the level of charge in the battery.

  • Page 5: Using The Unit As A 12 Volt Dc Portable Power Supply

    Vec010BD_Manual_042905 5/9/05 1:00 PM Page 4 WARNINGS • Jump-Starter Power Switch should be OFF prior to jump-starting. • This power system is to be used ONLY on vehicles or boats with 12 volt DC battery systems. • Never touch red and black clamps together — this can cause dangerous sparks, power arcing, and/or explosion.

  • Page 6: Replacement Parts, Battery Disposal, Troubleshooting, Specifications

    Vec010BD_Manual_042905 5/9/05 1:00 PM Page 6 Unlike the AC recharge method, DC recharge does NOT automatically activate the “battery status” display and provide a taper charge. Battery status can still be monitored by pressing the battery status level pushbutton. WARNINGS •...

Comments to this Manuals

Symbols: 0
Latest comments: