Table of Contents
Advertisement
Other Operations
Creating your own
program
— Program Play
You can make a program of up to 25 steps
in the order you want them to be played
back.
1
Press FUNCTION (or
FUNCTION +/– on the remote)
repeatedly until “CD” appears in
the display.
2
When playback is stopped,
press PLAY MODE repeatedly
until “PGM” lights up in the
display.
3
Press one of the DISC 1 ~ 5
buttons or DISC SKIP to select a
disc.
To program all the tracks on a disc
at once:
Proceed to step 5 while “ALL” appears
in the display.
To program all the MP3 files on a
folder at once:
Press
+/– repeatedly until the
folder you want appears in the display,
then proceed to step 5.
4
Select a track or file to program.
To program a track:
Press . or > repeatedly until the
track number you want appears in the
display.
To program an audio file:
Press
+/– repeatedly until the
folder you want appears in the display,
then press . or > repeatedly
until the file number you want appears
in the display.
Total playing time
Track
Disc tray
(including selected
number
number
track)
PGM
1
2
3
4
5
j
EFFECT
X-GROOVE
5
Press ENTER (or
on the
remote).
The track(s) or file(s) is(are)
programmed.
The program step number appears,
followed by total playing time.
6
Program additional discs, tracks
or files.
To program
Repeat steps
Other discs
3 and 5
Other tracks or files
4 and 5
on the same disc
Other tracks or
3 to 5
files on other discs
Other files on
4 and 5
same folder
(without pressing
+/–)
Other files on
4 and 5
other folder
7
Press NX (or N on the
remote).
Program Play starts.
l
Continued
US
Page 29
Hide quick links:
Advertisement
Table of Contents
