Sony Muteki LBT-ZX66i Operating Instructions Manual page 21

Sony mini hi-fi component system operating instructions
Hide thumbs Also See for Muteki LBT-ZX66i:
Table of Contents

Advertisement

• To use an iPod, refer to the operating
instructions of your iPod.
• Sony cannot accept responsibility in the event
that data recorded to iPod is lost or damage
when using an iPod with this unit.
• Some iPod operations may not be performed
using buttons on the unit or remote.
• Depending on the connected iPod, operations
may differ.
Other operations
You can control your iPod with the
following buttons on the remote or unit.
To
Do this
Pause playback Press NX (or X on the
remote). Press NX (or
X on the remote) again to
resume playback.
Select a track or
Press . or >
chapter of
repeatedly.
audiobook/
podcast
Fast forward or
Hold down m or M
fast rewind Play
during playback, then
release it at the point you
want.
Select the iPod
Press TOOL MENU or
menu item
or RETURN (or O
RETURN on the remote).
You can return to the
previous menu or select a
menu of the iPod.
Note
You can confirm menu
and item selections on the
iPod screen during
operation
Scroll up/down
Press
the iPod menus
Choose the
Press ENTER (or
select item
on the remote).
B
V
v
/
repeatedly.
b
or
Tips
• If you press NX while the system is turned
off, the system turns on automatically and
"iPod" function is selected. Then, playback
starts if there is an iPod connected to the iPod
dock (One Touch Play). However, depending
on the status of the connected iPod, the iPod
may not be playback.
• The following buttons on the unit or remote
have the similar function with the buttons on
the iPod (except iPod Touch).
Buttons on the
Buttons on the
unit or remote
iPod which have
similar function
BX (or B or X on
BX
the remote)
./>
./>
TOOL MENU or
MENU
RETURN (or O
RETURN on the
remote) or
B
ENTER (or
on
Center button.
the remote)
V
v
• Press and hold
or
has the similar function of turning the Click
Wheel on the iPod clockwise or
counterclockwise.
• Be sure that the iPod is not playing when
using the One Touch Play.
To use the system as a battery
charger
You can use the system as a battery
charger for the iPod when the system is on
or off.
The charging begins when the iPod is
placed on the iPod connector. The
charging status appears in the iPod screen
and when the system is off the display of
the unit change to clock. For details, refer
to the operating instructions of your iPod.
To stop charging the iPod
Remove the iPod. If you stop charging the
iPod when the system is off, press
DISPLAY repeatedly until the display is
turned off (Power Saving mode).
on the unit or remote
21
US

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents