Using Sleep Mode - Sony PSP-1001 Instruction Manual

Using sleep mode

If the PSP™ system is switched to sleep mode, the software that is playing will
be paused. When sleep mode is cleared, you can begin playback from the point
where the system entered sleep mode.
Notices
• Do not put the system in sleep mode while the Memory Stick Duo™ access indicator is
on. This may cause data loss or corruption.
• If the battery runs out while in sleep mode, when you clear sleep mode, the system will
not return to the screen that was displayed before entering sleep mode. It is recommended
that you save game data before you put the system in sleep mode.
Putting into sleep mode
1
With the system turned on, slide the power/hold switch up.
The power indicator flashes and then turns off, and the system enters sleep
mode.
Hint
Some software cannot be put in sleep mode.
Using sleep mode
US
31