Step 2: Connecting The Projector; Recorder Or Digital Tuner - Sony Cineza VPL-HS50 Operating Instructions Manual

Step 2: Connecting the Projector

When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; plugs that are not fully inserted often
generate noise. When pulling out a cable, be sure to pull it out from the plug,
not the cable itself.
• Refer to the operating instructions of the connected equipment.
Connecting to a DVD Player/Recorder or Digital Tuner
To connect to a DVD player/recorder or digital tuner equipped with
component video connectors
Rear of the projector
HDMI Y P /C
B
Y P /
B
C
B
: Video signal flow
Tip
To connect the projector to a DVD player/recorder, digital tuner, etc. which is not
equipped with component video connectors, use the S video cable to connect to the S-
video output of the DVD player/recorder, digital tuner, etc. If the connected equipment
is not equipped with the S-video output connector, use the video cable to connect to the
video output jack on the equipment.
P /C VIDEO
S VIDEO
B R R
INPUT
P /C
R R
Component video cable (not supplied)
AV amplifier
DVD player/recorder,
digital tuner, etc., with
component video
connectors
Y
Step 2: Connecting the Projector
Speakers
P /C
P /
B R R
C
B
13
GB