Sony VAIO VPCF13 Series User Manual page 150

Troubleshooting >
Bluetooth Technology
What should I do if I do not hear sound from my headphones or audio/video controller?
Check whether your headphones or audio/video controller supports the SCMS-T content protection. If not, you need to
change the SCMS-T settings to connect the device using the Advanced Audio Distribution Profile (A2DP). To change the
SCMS-T settings, follow these steps:
✍
Some VAIO models detect support of the SCMS-T content protection on a destination device for automatic reconfiguration of the SCMS-T settings. On
such models, SCMS-T Settings in step 3 is not displayed because there is no need to manually change the settings.
1 Click Start and Devices and Printers.
2 Right-click the icon for the device that you want to connect using the A2DP and select Control.
3 Click SCMS-T Settings.
4 Click No when the Connect to a device only if it supports SCMS-T content protection message appears.
What should I do if the Bluetooth icon is not displayed on the taskbar?
❑ If the VAIO Smart Network is installed on your computer, make sure that the switch next to Bluetooth is set to On in the
VAIO Smart Network window.
❑ If the SmartWi Connection Utility is installed on your computer, make sure that the switch next to Bluetooth is set to
ON in the SmartWi Connection Utility window.
❑ To display the Bluetooth icon on the taskbar, follow these steps:
1 Click Start and Devices and Printers.
2 Right-click the Bluetooth device icon and click Bluetooth settings.
3 Click the Options tab and select the Show the Bluetooth icon in the notification area check box.
n 150 N