Remote Controller - Sony NSP-100 Operating Instructions Manual

IRD REMOTE (remote controller settings)
ON/OFF (third switch from left): Enable (ON) or
disable (OFF) the remote controller.
1/2 (rightmost switch): When using two NSP-100
units, to select the unit that responds to the remote
controller, set different remote controller codes for
them.
For details, see "Preparations" (page 9).
0 PLAY button
9 PAUSE button
8 Reverse shuttle
playback button
(
1 DISPLAY button
During movie/still playback: Pressing this button
displays the title of the movie/still being played.
Press once more to clear the display.
During playlist playback: Pressing this button displays
the numerical position of the current playlist in the
list of playlists shown on the "Playlist" screen.
(Example: "3/100" means playing playlist 3 out of
100 playlists.) Press once more to clear the display.
2 LIST button
In normal operation: Pressing this button shows the
last displayed list screen. Subsequent presses
change the displayed list screen, in the following
sequence.
"Playlist" screen (list of playlists)
r
"Video" screen (list of movie files)
r
"Graphic" screen (list of still image files)
During playlist playback: Pressing this button
displays details of the playlist. Press once more to
clear the display.
DISPLAY LIST MENU
PAUSE
PLAY
1 2
)
4 5
7 8

Remote Controller

Note
Using the remote controller to control the NSP-100
requires settings of both the NSP-100 rear panel DIP
switches and the remote controller.
For details, see "Preparations" (page 9).
1 DISPLAY button
2 LIST button
3 MENU button
PUSH
ENTER
4 ENTER/b, B, v, V control
STOP
5 STOP button
3
6 Forward shuttle playback button (
6
7 Numeric buttons (0 to 9)
9 0
3 MENU button
When the menu is not displayed: Pressing this button
switches to menu mode, and the "MENU" screen
appears.
When the menu is displayed: Pressing this button
switches out of menu mode, and the menu display
disappears.
For details of the menu, see "Operation" (page 9).
4 ENTER/b, B, v, V control
The center of this control functions as an ENTER
button. The outer portions close to the arrow indications
function as arrow buttons. (In this manual, the center of
this control is referred to as the ENTER button and the
outer portions are referred to as theb, B, v and V
buttons, respectively.)
ENTER button
While the "Playlist" screen, "Video" screen, or
"Graphic" screen is displayed: Pressing this
button plays the playlist, movie, or still image that is
selected (shown in reverse video).
)
Names and Functions of Parts
7