While Using Group Function - Sony MZ-NH600D Operating Instructions Manual

Symptom
The edited tracks
may exhibit sound
dropout during
search operations.
There is no R-
channel sound
output when
playing a track
recorded from a
cassette deck or
through an
amplifier, or when
listening to sound
from a cassette deck
or amplifier.

While using group function

Symptom
The group function
does not operate.
A track cannot be
recorded to a new
group. A new group
cannot be created.
42
Cause/Remedy
• This occurs due to the MiniDisc system limitation. The fragmentation
of data may cause sound dropout while searching because the tracks are
played in higher speed than normal playback.
• There is no R-channel output if the cassette deck or an amplifier is
connected with a monaural cord.
, Make sure to use a stereo connecting cord. If, however, the
connected equipment is monaural, there will be no R-channel
sound output even with a stereo connecting cord.
Cause/Remedy
• While using a disc without group setting, an attempt was made to select
some group-related menu.
, Use a disc with group setting.
• This is due to the MiniDisc system limitations (in MD mode only).
Group information has been written to the area where the disc name is
stored. The disc name and track names are recorded in the same area,
which can store a maximum of approximately 1,700 characters. If the
total number exceeds this amount, a new group cannot be created even
though group mode is on. It is also impossible to make group settings at
this time.