Black Box C6AFP70S-24 Customer Support Information

Feed-Through CAT6A Patch Panels
No punchdowns needed with this feed-through panel.
• Unique staggered panel design features RJ-45 ports on both sides
of the patch panel.
• Feed-through connectors provide easy Category 6A connectivity.
• Perfect for voice and data transmission up to 10 Gbps.

Specifications

Standards — Category 6A
Connectors — C6AFP70S-24: (24) shielded RJ-45 on front,
(24) shielded RJ-45 on back;
C6AFP70S-48: (48) shielded RJ-45 on front,
(48) shielded RJ-45 on back
Size — C6AFP70S-24: 1.75"H (1U) x 19"W x 4.5"D
(4.4 x 48.3 x 11.4 cm);
C6AFP70S-48: 3.5"H (2U) x 19"W x 4.5"D
(8.9 x 48.3 x 11.4 cm)
Weight — C6AFP70S-24: 2.02 lb. (0.918 kg);
C6AFP70S-48: 3.89 lb. (1.76 kg)
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
BLACK BOX
Overview
The Feed-Through CAT6A Patch Panels meet Category 6A
channel performance requirements and provide patching
without punching down the wires to the ports. These sturdy
panels install in relay racks or communications cabinets.
After ordering a CAT6A Patch Panel, you should have received
the following items:
• (1) CAT6A Patch Panel with ground wire installed
• (1) cable management bar for C6AFP70S-24,
or (2) cable management bars for C6AFP70S-48
• (4) 10-32 cuphead screws
• (4) 12-24 cuphead screws
• This users' manual
If anything is missing or damaged, please contact Black Box at
724-746-5500.
For installation instructions, turn this page over...
February 2010 C6AFP70S-24
MT1000A-85-R4
C6AFP70S-48
®