Carpet Cleaning - Bissell 1699 SERIES - 120V User Manual

PreTreating
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet in high traffic
areas such as entryways and hallways:
Set the SmartMix dial to High Traffic.
1.
Set ReadyTools dial to PreTreat.
2.
Plug into a proper outlet and turn on both the Power and
3.
Smart Temp Switches.
While pressing the trigger slowly make several passes over
4.
the area to be cleaned. Caution Do not overwet.
Turn the machine Power Switch OFF and let the BISSELL
5.
Advanced Cleaning Formula dissolve the tough soil for 1-2
minutes before continuing.

Carpet Cleaning

Plug into a proper outlet and turn the Power and the
1.
SmartTemp switches ON. Wait two minutes for the heater to
warm up before beginning to clean.
While pressing the trigger, make one slow forward wet pass
2.
and another one back. Let the SmartTemp heated formula
and DirtLifter Powerbrush do the work for you.Caution: Do
not overwet.
Note: Take care not to run over loose objects or edges of area
Release the trigger and make one slow forward and back
3.
pass over the same area to remove any residual dirty water.
Repeat cleaning passes until solution being pulled up
4.
appears clean.
Continue passes without pressing the trigger until you can't
5.
see any more water being pulled up.
Note:
After cleaning, you may want to turn the SmartMix dial to
6.
Water Only to give your carpeting a final rinse. This will
ensure thorough removal of embedded dirt loosened by the
Advanced Deep Cleaning Formula. Advanced Deep Cleaning
Formulas contains an anti-resoiling agent that helps your
carpets repel dirt and keeps them looking good longer.
When the cleaning job is complete refer to the Maintenance
7.
section for machine cleanup and storage instructions on
12
page 18
rugs. Stalling brush may result in premature belt failure.
Both the SmartMix and the clean water tank must have liquid in
them in order for the machine to spray. If one tank is empty the
machine will not apply either cleaning solution or water only.
Tip:
Try pretreating
stairs or entry
ways with
BISSELL Tough
Stain PreCleaner.
Then deep
clean with the
SmartMix ®
dial set on
High Traffic.
ATTENTION
BERBER CARPET
OWNERS:
Some Berber Carpets have a
tendency to fuzz with wear.
Repeated strokes in the
same area with an ordinary
vacuum or deep cleaner may
aggravate this condition.
Please see Stain Removal
instructions on page 13.
When filling bottle or
storing unit, set
dial to: