Playing Discs - Sony DVP-S335 Operating Instructions Manual

Playing Discs

This chapter describes how to play a
DVD/CD/VIDEO CD.
When you play a disc recorded in the NTSC
color system, the player outputs the video
signal or the setup display etc. in the NTSC
color system and the picture may not appear
on PAL color system televisions. In this case,
open the disc tray and remove the disc.
18
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted. Refer to the
instructions supplied with your disc.
!
Power indicator
1 2
4 5
7 8
0
1
Turn on your TV .
Turn on the TV and select the video input so that you
can view the pictures from this player.
When using a r e ceiver (amplifier)
Turn on the receiver (amplifier) and select the
appropriate position so that you can listen to the
sound from this player.
2
Press ! on the player .
The player enters standby mode and the power
indicator lights up in red.
3
Press A on the player , and place a disc on the disc
tray.
The player automatically turns on and the power
indicator lights up in green.
With the playback
side facing down
4
Press H.
The disc tray closes and the player starts playback
(continuous play). Adjust the volume on the TV or the
receiver (amplifier).
After following Step 4
xWhen playing a DVD
A DVD menu or title menu may appear on the TV
screen (see page 22).
xWhen playing a VIDEO CD
A menu may appear on the TV screen depending on the
VIDEO CD. You can play the disc interactively,
following the instructions on the menu. (PBC Playback,
see page 23.)
H A
@/1
3
6
9