Sony DVP-NS38 Operating Instructions Manual page 16

When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 61.
Notes
• Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR,
you may not receive a clear image on the TV screen.
• When you connect the player to your TV via the SCART jacks, the TV's input source is set to the player
automatically when you start playback. In this case, press t (TV/video) on the remote to return the input
to the TV.
When you play a disc recorded in the NTSC colour system, the player outputs the video signal
or the Setup Display etc. in the NTSC colour system and the picture may not appear on the
PAL colour system televisions. In this case, open the tray and remove the disc.
16
CD/DVD player
VCR
TV
Connect
directly