Setting The Date And Time - Sony CD Mavica MVC-CD500 Operating Instructions Manual

Setting the date and time

Mode dial
1
, Set the mode dial to
• You can also carry out this operation when the
mode dial is set to P, S, A, M, SCN,
• To change the date and time, set the mode dial
to SET UP, select [Clock Set] in
(page 118), and perform the procedure from
step 3.
16
POWER switch
2
. , Slide the POWER switch in the
direction of the arrow to turn
on the power.
or .
The POWER lamp (green) lights up and the
(Setup 1)
Clock Set screen appears on the LCD
1
screen.
Clock Set
Y/M/D
M/D/Y
D/M/Y
2003 / 1 / 1 12 : 00
OK
AM
Cancel
OK
Clock Set
2003 / / 1 12
1
OK
3
, Select the desired date display
format with v/V on the control
button, then press z.
Select from [Y/M/D] (year/month/day),
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
• If the rechargeable button battery, which
provides the power for saving the time data, is
ever fully discharged (page 120), the Clock Set
screen will appear again. When this happens,
reset the date and time, by starting from step 3
above.
Y/M/D
M/D/Y
D/M/Y
: 00
OK
AM
Cancel