The image is too bright.
You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the
•
exposure (page 33).
The brightness of the screen is too bright. Adjust the brightness of the LCD backlight
•
selecting other than "up" (page 20).
The image colors are not correct.
Picture Effect function is activated. Cancel the Picture Effect function (page 39).
•
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring. This phenomenon is not a malfunction.
•
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] in the
•
Shoot the subject at a distance closer than the recommended shooting distance using the flash
•
(
step 5 in "Read This First").
t
Light the room and shoot the subject.
•
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded (page 5,
•
Cannot shoot images in succession.
The internal memory or "Memory Stick Duo" is full. Delete unnecessary images (
•
"Read This First").
The battery level is low. Install charged battery pack.
•
Viewing images
Refer to "Computers" (page 88) in conjunction with the following items.
Your camera cannot play back images.
Set the mode switch to
•
The folder/file name has been changed on your computer (page 67).
•
When an image file has been processed by a computer or when the image file was recorded
•
using a model other than that of your camera, playback on your camera is not guaranteed.
The camera is in USB mode. Delete the USB connection (page 65).
•
86
(Setup) menu to [On] (page 49).
(page 25).
"Read This First").
t
step 6 in
t