Number Buttons; Reset Button; Disc Slot - Sony CDX-GT510 Operating Instructions Manual

H EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
I Receptor for the card remote
commander
J SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
K BTM/CAT*
button 8
2
To start the BTM function (press and hold).
L MODE button 8, 11
To select the radio band (FM/AM); select the
SAT tuner band (mode)*
M DSPL (display) button 8
To change display items.
N Number buttons
CD/MD* :
1
(1)/(2): GP* /ALBM*
4
To skip albums (press); skip albums
continuously (press and hold).*
(3): REP 8, 11
(4): SHUF 8, 11
(6): PAUSE*
7
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
O SCRL (scroll) button 8
To scroll the display item.
P RESET button 4
Q Z (eject) button 5
To eject the disc.
R Disc slot 5
To insert the disc.
2 ; select the unit* 3 .
5 –/+
6
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
ql < (.)/, (>) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
w; VOL (volume) +/– button
To adjust volume.
wa ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
ws SEL (select) button
The same as the select button on the unit.
wd M (+)/m (–) buttons
To control CD, the same as (1)/(2)
(GP/ALBM –/+) on the unit.
wf Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When the SAT tuner is connected.
*3 When a CD/MD changer is connected.
*4 When an ATRAC CD is played.
*5 When an MP3/WMA/AAC is played.
*6 If the changer is connected, the operation is
different, see page 11.
*7 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 14.
7