Receiving The Stored Stations; Storing Only The Desired Stations; Tuning In A Station Through A List; List-Up - Sony CDX-CA900 Operating Instructions Manual

Receiving the stored stations

1
Press (SOURCE) repeatedly to select
"TUNER."
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ((1) to (6))
on which the desired station is stored.
Tip
M m
Press or to receive the stations in the order they
are stored in the memory (Preset Search function).
If preset tuning does not work
Press < or , to search for the
station (automatic tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
Tips
• If automatic tuning stops too frequently, turn on the
Local Seek to limit seek to stations with stronger
signals (see "Changing the sound and display
settings" on page 22).
• If you know the frequency of the station you want to
listen to, press and hold
approximate frequency, then press
repeatedly to fine adjust to the desired frequency
(manual tuning).
If FM stereo reception is poor
Select monaural reception mode
(see "Changing the sound and display
settings" on page 22).
The sound improves, but becomes monaural
("ST" disappears).
Tip
If FM broadcasts are difficult to hear, set DSO to off
(page 24).
14
< ,
or to locate the
< ,
or
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
1
Press (SOURCE) repeatedly to select
"TUNER."
2
Press (MODE) repeatedly to select the
band.
3
Press < or , to tune in the station
that you want to store.
4
Press the desired number button ((1)
to (6)) for 2 seconds until "MEM"
appears in the source display.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
Tuning in a station through a
list

— List-up

1
During radio reception, press (LIST)
momentarily.
The frequency or the name assigned to the
current station appears in the display.
2
Press M or m repeatedly until you find
the desired station.
If no name is assigned to the selected station,
the frequency appears in the display.
3
Press (ENTER) to tune in the desired
station.