1
2
to AUDIO IN
4
External
microphone
Cable clamp
3
3
Set the corresponding AUDIO IN
switch (CH-1 or CH-2) to EXT.
4
Set the corresponding LINE/MIC/+48V
switch (CH-1 or CH-2) according to the
connected microphone.
MIC: For a microphone that requires no
power supply
+48V: For a microphone that requires +48V
power supply (such as the ECM-673)
Adjusting the Audio Recording
Levels
You can select automatic or manual adjustment
mode independently for each channel.
To adjust the levels automatically (AGC)
When the AUDIO SELECT switches CH-1 and
CH-2 are set to AUTO, the audio recording levels
are automatically adjusted.
To adjust the levels manually
Set the AUDIO SELECT switches CH-1 and CH-
2 to MANUAL, and adjust the audio recording
levels by turning the AUDIO LEVEL controls.
The value is set to 0 dB when the control is set to
5. Setting to 10 maximizes the level (+12 dB) and
∞
setting to 0 minimizes it (–
).
The input levels are displayed on the screen when
you press the DISPLAY/BATT INFO button.