Lcd/Vf Set Menu - Sony EXMOR PMW-EX1 Operating Instructions Manual

LCD/VF SET Menu

LCD/VF SET
Menu items
LCD
Adjusting the LCD
monitor
EVF
Setting the
viewfinder
Peaking
Setting the peaking
function for the
LCD monitor/EVF
Marker
Setting the
markers added to
pictures on the
LCD monitor/EVF
screen
Zebra
Setting the zebra
pattern
104 Setup Menu List
Subitems and setting values Contents
Color
–99 to +99 (±0)
Contrast
–99 to +99 (±0)
Brightness
–99 to +99 (±0)
Backlight
High / Low
Mode
Color / B&W
Contrast
–99 to +99 (±0)
Brightness
–99 to +99 (±0)
Power
Auto / On
Color
White / Red / Yellow / Blue
Level
High / Mid / Low
Setting
On / Off
Safety Zone
On / Off
Safety Area
80% / 90% / 92.5% / 95%
Center Marker
On / Off
Aspect Marker
On / Off
Aspect Select
4:3 / 13:9 / 14:9 / 15:9
Guide Frame
On / Off
Zebra Select
1 / 2 / Both
Zebra1 Level
50 to 107 (70)
Adjust the color of pictures on the LCD monitor.
Adjust the contrast of pictures on the LCD monitor.
Adjust the brightness of pictures on the LCD monitor.
Select the brightness of the EVF backlight.
Select the display mode of the EVF.
Color: Color mode
B&W: Monochrome mode
Adjust the contrast of pictures on the EVF screen.
Adjust the brightness of pictures on the EVF screen.
Set the condition to turn the EVF on.
Auto: To turn it on when the LCD monitor is closed or rotated
to the upside-down position.
On: To keep it on regardless of the status of the LCD monitor
Select the color of the peaking signal.
Set the level of the peaking signal.
Turn all marker indications on/off in combination.
Turn the safety marker on/off.
Select the size (ratio to the entire screen) of the safety zone
marker.
Turn the center marker on/off.
Turn the aspect marker on/off.
Select the type of the aspect marker.
Turn the guide frame marker on/off.
Select the zebra pattern(s) to be displayed.
1: To display zebra 1 only
2: To display zebra 2 only
Both: To display both zebra 1 and zebra 2.
Set the display level of zebra 1.