Sony Handycam DCR-SR68 Operating Manual page 38

the installation screen appears, follow
the instructions to install the required
software.
Restart the computer if required to

complete the installation.
Connect the camcorder to the computer

during the installation.
When the installation is completed,
following icons will appear.
Remove the CD-ROM from your
computer.
: Starts "PMB. "
: Displays "PMB Help. "
: Displays "PMB Launcher. " "PMB
Launcher" enables you to start "PMB"
or other software, or to open web sites.
Other icons may appear.

No icon may appear depending on the

installation procedure.

Notes
To create discs or use other functions on

Windows XP, Image Mastering API v2.0 for
Windows XP should be installed. If Image
Mastering API v2.0 for Windows XP has not
been installed yet, select it from required
programs on the installation screen and install
it following the procedures displayed. (The
computer must be connected to the internet
for the installation.) You may install Image
Mastering API v2.0 for Windows XP in
response to the message displayed when you try
to start those functions.
US

To disconnect your camcorder from the
computer

Click the icon at the bottom right of the
desktop of the computer  [Safely remove
USB Mass Storage Device].
Touch [END]  [YES] on the camcorder

screen.

Disconnect the USB cable.

Notes
Access from the computer using the supplied

software "PMB. " Do not modify the files or
folders on the camcorder from the computer.
The image files may be destroyed or may not be
played back.
Operation is not guaranteed, if you perform the

above operation.
When you delete image files, follow the steps

on page 34. Do not delete the image files on the
camcorder directly from the computer.
Do not copy the files on the recording

media from the computer. Operation is not
guaranteed.