Sony Handycam DCR-DVD610 Operating Manual page 83
Digital video camera recorder
Hide thumbs
Also See for Handycam DCR-DVD610:
- Operating manual (190 pages) ,
- Specifications (2 pages) ,
- Service manual (43 pages)
Table of Contents
Advertisement
Number of still images recordable on
the internal memory (DCR-DVD810)
You can record up to 9,999 still images on
the internal memory. The recordable
number of still images varies depending on
the recording condition.
Number of still images recordable on
a “Memory Stick PRO Duo” (approx.)
1.0M
VGA (0.3M)
1152 × 864
640 × 480
880
2800
512MB
1800
5800
1GB
3700
11500
2GB
7200
23000
4GB
14500
47000
8GB
b Notes
• Numbers in the table are of when using a
“Memory Stick PRO Duo” made by Sony
Corporation. The recordable number of still
images varies depending on the recording
conditions or the type of “Memory Stick.”
z Tips
• You can use a “Memory Stick PRO Duo” with a
capacity of 256MB or smaller for recording still
images.
• The numbers in the table are of the recordable
number of still images of the maximum image
size that can be recorded with your camcorder.
Check the actual recordable number on the
screen when you are recording still images
(p. 133).
FILE NO. (File number)
B SERIES
Assigns file numbers in sequence, even if
the “Memory Stick PRO Duo” is replaced
with another one.
RESET
Assigns individual file numbers for each
“Memory Stick PRO Duo.”
NIGHTSHOT LIGHT
See page 80.
GUIDEFRAME
See page 81.
FLASH MODE (DCR-
DVD710/DVD810)
You can set this function when you use an
external flash (optional) that is compatible
with your camcorder.
B ON ( )
Flashes every time.
AUTO
Flashes automatically.
b Notes
• Remove any dust from the surface of the flash
before using it. Flash effect may be impaired if
heat discoloration or dust obscures the lamp.
• If you use the flash in bright places such as
when shooting a backlit subject, the flash may
not be effective.
FLASH LEVEL (DCR-
DVD710/DVD810)
You can set this function when you use an
external flash (optional) that is compatible
with your camcorder.
HIGH(
)
Makes the flash level higher.
B NORMAL( )
LOW(
)
Makes the flash level lower.
Page 83
Continued ,
- Quick Links:
- Step 2: Charging the Battery Pack
Hide quick links:
Advertisement
Table of Contents
