SonicWALL TZ 170 Getting Started Manual page 15

PPPoE
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPPoE Client
Obtain an IP Address
Automatically
Use the following
IP Address
PPPoE User Name
PPPoE Password
Inactivity Disconnect
(minutes)
Click Next.
PPTP
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPTP Client
PPTP Server IP
Address
PPTP User Name
PPTP Password
Obtain an IP Address
Automatically
Use the following
IP Address
SonicWALL WAN
IP Address
WAN Subnet Mask
Gateway (Router)
Address
Click Next.
Page 14
Select this if your ISP assigns you a dynamic IP address.
Select this if your ISP has assigned you a static IP address, and
enter the address.
Enter the user name for your Internet account. Your ISP may
require you to enter your username in e-mail address format,
including "@" and the domain name, for example,
joe.user@sonicwall.com.
Enter the password for your Internet account.
Check this box if you want the SonicWALL TZ 170 Wireless to
disconnect from the Internet if there is no traffic for the number of
minutes you enter.
Enter the address of the PPTP server.
Enter your network user name.
Enter your network password.
Select this if the server assigns you a dynamic IP address.
Check this if you have been given a static IP address, and fill in
the following three fields.
Enter the static IP address for your connection.
Enter the subnet mask for your connection.
Enter the address of your Internet Gateway.